Fusion 360

In addition to the below, please see the forum post: Fixing GRBL’s G2/G3 Arc Errors in Fusion360.

Current versions of Fusion 360 from Autodesk have a built-in post processor for Carbide 3D machines. To generate G-Code for the Nomad or Shapeoko:

  • Post-process your file as normal
  • Select the “Carbide3d.cps” post processor
  • Use the default properties provided by Autodesk

Note: Although we prefer metric units, Carbide Motion will allow Imperial-based G-Code as well.

If your properties get changed, you can use the values shown below to get back to normal.

Fusion360 settings for Carbide 3D



The latest tutorials sent straight to your inbox.